D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
share
/
doc
/
cryptsetup
/
Filename :
v2.8.0-ReleaseNotes
back
Copy
Cryptsetup 2.8.0 Release Notes ============================== Stable release with new features and bug fixes All users of cryptsetup 2.7 must upgrade to this version. Changes since version 2.7.5 ~~~~~~~~~~~~~~~~~~~~~~~~~~~ * Introduce support for inline mode (use HW sectors with additional hardware metadata space). Some enterprise NVMe drives allow formatting sector size with additional metadata space, for example, sector size 4096 bytes + 64 bytes for metadata. We hope common firmware will soon support such features in more recent models. If this metadata space is available (not internally used by a data integrity profile), it removes the need to use the dm-integrity layer for sector metadata allocation. This means that the performance bottleneck caused by the dm-integrity journal is eliminated. Note: such drive must be reformatted with an external nvme tool. You can check for support (reported as LBA format) by running the command "nvme id-ns -H <nvme device>" and then you can reformat to the selected profile (with complete data loss) with "nvme format -l <lbaf>. This way, you can also reformat NVMe drive to 4096-byte sectors,which is strongly recommended for encryption performance. The required device mapper for inline mode was introduced in Linux kernel version 6.11. The inline mode can be used with the new --integrity-inline option. For integritysetup, the kernel dm-integrity layer is still used, but it directly maps metadata to the hardware (eliminating the journal). For cryptsetup, the dm-integrity layer is eliminated, and only the dm-crypt kernel driver is used. The libcryptsetup exports a new crypt_format_inline API call. Examples (underlying device must provide inline HW metadata space): Use integritysetup format with inline mode with default CRC32 checksums: # integritysetup format --sector-size 4096 --integrity-inline <device> [--no-wipe] # integritysetup open <device> test # integritysetup status test /dev/mapper/test is active. type: INTEGRITY tag size: 4 [bytes] integrity: crc32c device: <device> sector size: 4096 [bytes] ... inline mode journal: not active Use LUKS2 with authenticated encryption (here with AEGIS AEAD cipher): # cryptsetup luksFormat --integrity-inline --integrity aead --sector-size 4096 \ -c aegis128-random --key-size 128 <device> [--integrity-no-wipe] # cryptsetup open <device> test # cryptsetup luksDump <device> ... Requirements: inline-hw-tags After format, the inline mode is used automatically, and no special options are needed. Please check the manual pages for more details about used options. Note that the LUKS2 authenticated encryption is still an experimental feature. The inline mode only improves performance by removing the dm-integrity layer. * Finalize use of keyslot context API. Keyslot context is a generic abstraction over keyslot manipulation. It extends many exiting commands by additional functions like tokens in activation, resume, reencryption and similar commands without introducing new specific API functions. * Make all keyslot context types fully self-contained. In the previous version, the caller is responsible for releasing of some allocated memory. In this version, all memory is allocated internally. The existing keyslot context API function provides backward compatibility through versioned symbols. * Add --key-description and --new-key-description cryptsetup options. These can be used for the specification of the keyring with passphrase retrieval in the open, resize, luksResume, luksFormat, luksAddKey and luksDump. * Support more precise keyslot selection in reencryption initialization. Reencryption must update stored keys in keyslots, so it needs to unlock all keyslots first. When no specific keyslot is selected by the --key-slot option, all active keyslots are updated. Users may narrow down the selection of keyslots by specifying either --token-id, --token-type or --token-only option. Only keyslots associated with the specific token (--token-id) or a specific type (--token-type) or any token (--token-only) will be updated. All other keyslots will be erased after reencryption is finished. During reencryption, there are two volume keys (old and new). For very specific use cases, reencryption can also be initialized by providing volume keys directly by --volume-key-file, --new-volume-key-file, --volume-key-keyring or --new-volume-key-keyring options. These options allow reencryption of the device with no active keyslots (these can be added later). If the --force-no-keyslots option is specified, all active keyslots will be erased after the reencryption operation is finished. * Allow reencryption to resume using token and volume keys. The reencryption can be resumed using tokens (similar to initialization described above). For very specific use cases, reencryption can be resumed by providing volume keys. * Cryptsetup repair command now tries to check LUKS keyslot areas for corruption. A keyslot binary area contains an encrypted volume key diffused to a larger area by the anti-forensic splitter. If this area is corrupted, the keyslot can no longer be unlocked, even with the correct password. Active keyslot area should look like random data, so some specific corruption can be detected by randomness analysis. Cryptsetup repair command now tries to analyze the area expecting a uniform distribution of bytes in 4096-byte blocks. If a problem is detected, it tries to localize corruption in a smaller block (using the expected bit count). Both tests are based on the Chi-squared statistical test. This analysis can replace the external keyslot check program and usually is more sensitive. However, it cannot detect all corruptions and can produce false positives. Please use it as a hint when your password is no longer accepted, and you suspect header corruption. This is the example output of the analysis: # cryptsetup repair <device> Keyslot 2 binary data could be corrupted. Suspected offset: 0x88000 You can use hexdump -v -C -n 128 -s <offset_0xXXXX> <device> to inspect the data. The test does not modify the header. A keyslot corruption cannot be repaired. You have to use a backup header. * Opal2 SED: PSID keyfile is now expected to be 32 alphanumeric characters. If the keyfile size is not explicitly set, it uses only first 32 bytes. All Opal2 manufacturers seem to use PSID of this length. * Opal2: Avoid the Erase method and use Secure Erase for locking range. The Erase method is defined for Single-user mode (SUM) and works on SUM-enabled locking ranges. As we do not use SUM yet, this always fails and falls back to Secure erase anyway. * Opal2: Fix some error description (in debug only). Some Opal error messages were incorrect. Cryptsetup now use all codes according to TCG specifications. * Opal2: Do not allow deferred deactivation. The self-encrypting drive must be locked immediately; deferred deactivation is not supported. * Allow --reduce-device-size and --device-size combination for reencryption (encrypt) action. For some very specific cases, this can be used to encrypt only part of the device together with allocation a new space for the LUKS header. * Fix the userspace storage backend to support kernel "capi:" cipher specification format. This avoids unnecessary fallback to the device-mapper instead of the userspace crypto library in luksFormat. The "capi:" is Linux kernel cryptographic format. For example, capi:xts(aes)-plain64 is equivalent of aes-xts-plain64. * Disallow conversion from LUKS2 to LUKS1 if kernel "capi:" cipher specification is used. LUKS1 never officially supported this cipher specification format. Such devices cannot be converted to LUKS1 (while existing devices can still be activated). * Explicitly disallow kernel "capi:" cipher specification format for LUKS2 keyslot encryption. This specification is intended to be used for data encryption, not for keyslots. * Do not allow conversion of LUKS2 to LUKS1 if an unbound keyslot is present. LUKS1 does not support unbound keyslots. Such devices cannot be converted. * cryptsetup: Adjust the XTS key size for kernel "capi:" cipher specification. Double key size as there are two keys the same way as for dm-crypt format. * Remove keyslot warning about possible failure due to low memory. This check was intended to warn users about possible out-of-memory situations but produced many false positives. * Do not limit Argon2 KDF memory cost on systems with more than 4GB of available memory. The memory cost is intended to be limited only in low-memory situations (like virtual machines without swap), not on systems with plenty of RAM. * Properly report out of memory error for cryptographic backends implementing Argon2. * Avoid KDF2 memory cost overflow on 32-bit platforms. * Do not use page size as a fallback for device block size. This check produced wrong values if used on platforms with larger page sizes (64kB) and specific underlying storage (like ZFS). * veritysetup: Check hash device size in advance. If hashes are stored in a file image, allocate the size in advance. For a block device, check if hashes (Merkle tree) fits the device. * Print a better error message for unsupported LUKS2 AEAD device resize. * Optimize LUKS2 metadata writes. LUKS2 supports several JSON area length configurations. Do not write full metadata (including padding), as it may generate noticeable overhead with LUKS2. * veritysetup: support --error-as-corruption option. The panic/restart_on_error options were introduced in Linux kernel 6.12 and process errors (like media read error) the same way as data corruption. Use this flag in combination with --panic-on-corruption or --restart-on-corruption. * Report all sizes in status and dump command output in the correct units. Since the support of --sector-size option, the meaning of "sectors" became ambiguous as it usually means 512-byte sectors (device-mapper unit). Confusion occurs when the sector size is 4096 bytes while units used for display are 512-byte sectors. All status commands in tools now display units explicitly to avoid confusion. For example: # cryptsetup status test ... sector size: 4096 [bytes] offset: 32768 [512-byte units] (134217728 [bytes]) size: 7501443760 [512-byte units] (30725913640960 [bytes]) If you parse the output of status commands, please check your scripts to ensure they work with the new output properly. * Add --integrity-key-size option to cryptsetup. This option can be used to set up non-standard integrity key size (e.g. for HMAC). It adds a new (optional) JSON "key_size" attribute in the segment.integrity JSON object (see updated LUKS2 specification). If not set, the code uses selected hash length size. * Support trusted & encrypted keyrings for plain devices. * Support plain format resize with a keyring key. If a plain dm-crypt device references the keyring, cryptsetup now allows resizing. The user must ensure that the key in the keyring is unchanged since activation. Otherwise, reloading the key can cause data corruption after an unexpected key change. * TCRYPT: Clear mapping of system-encrypted partitions. TrueCrypt/VeraCrypt supports full system encryption (only a partition table is not encrypted) or system partition encryption (only a system partition is encrypted). The metadata header then contains the offset and size of the encrypted area. Cryptsetup needs to know the specific partition offset to calculate encryption parameters. To properly map a partition, the user must specify a real partition device so cryptsetup can calculate this offset. As the partition can be an image in a file, cryptsetup now tries to determine proper parameters and use device size stored in VeraCrypt metadata. Please see the manual page description (TCRYPT section) for a detailed description. * TCRYPT: Print all information from the decrypted metadata header in the tcryptDump command. Print also volume sizes (if present) and flags. * Always lock the volume key structure in memory. Some memory for safe allocation was not allocated from locked (unswappable) memory. Older cryptsetup locked all memory. Selective locking was introduced in version 2.6.0. * Do not run direct-io read check on block devices. Block devices always support direct-io. This check produced unnecessary error with locked Opal2 devices. * Fix a possible segfault in deferred deactivation. Thanks Clément Guérin for the report. * Exclude cipher allocation time from the cryptsetup benchmark. * Add Mbed-TLS optional crypto backend. Mbed-TLS is a tiny TLS implementation designed for embedded environments. The backend can be enabled with the --with-crypto_backend=mbedtls configure option. * Fix the wrong preprocessor use of #ifdef for config.h processed by Meson. Cryptsetup supports Autoconf and, optionally, Meson configuration. Part of the code wrongly used #ifdef instead of #if conditional sections. This caused problems with Meson-generated config.h. * Reorganize license files. The license text files are now in docs/licenses. The COPYING file in the root directory is the default license. Libcryptsetup API extensions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The libcryptsetup API is backward compatible with all existing symbols. Due to the self-contained memory allocation, these symbols have the new version crypt_keyslot_context_init_by_passphrase; crypt_keyslot_context_init_by_keyfile; crypt_keyslot_context_init_by_token; crypt_keyslot_context_init_by_volume_key; crypt_keyslot_context_init_by_signed_key; crypt_keyslot_context_init_by_keyring; crypt_keyslot_context_init_by_vk_in_keyring; New symbols: crypt_format_inline crypt_get_old_volume_key_size crypt_reencrypt_init_by_keyslot_context crypt_safe_memcpy New defines: CRYPT_ACTIVATE_HIGH_PRIORITY CRYPT_ACTIVATE_ERROR_AS_CORRUPTION CRYPT_ACTIVATE_INLINE_MODE CRYPT_REENCRYPT_CREATE_NEW_DIGEST New requirement flag: CRYPT_REQUIREMENT_INLINE_HW_TAGS